Blog
this tag is reserved for posts that are supposed to appear in the vlog section of the site
Which step are we at (updated in September 2024)?
Work Package 0 Management and Synthesis Activities (Status: In progress): WP0 is in charge of the coordination of the project and the communication of between project partners and with ESA delegates. Work Package 1 Consolidation of a Reference EO dataset (Status: Done ): Water cycle variables studied during the project and the hosting partner ( sources of figure extraction) The first step of the project is to catalogue, retrieve and prepare a set of reference Earth Observations (EO) dataset. This dataset gathers remotely-sensed products monitoring essential variables from the continental water cycle at high-resolution that are soil moisture, evapotranspiration, precipitation, snow, surface water, ground and total water storage, irrigation. This Work Package (WP) is a group effort as several partners from the consortium implemented on this dataset, each partner being leader of a given variable from the above list while CSGROUP managed the overall WP. The purpose was then to organize a collection of EO products and also extract and prepare them for each of the study regions and the study period. This EO reference dataset will then be studied and compared through the Round Robin study in WP4. Work Package 2 Consolidation of a Reference LSM dataset (Status: Done ): 4dHydro working package 2 aims to deliver and benchmark a (tier 1) hydrological reference dataset. This dataset comprises of existing LSM/HM simulations from previous studies and covers a wide range of LSM/HM models and simulations. Despite this diversity, simulations in the reference dataset are uniformly formatted following our storage protocol (see the working package 2 User Manual under 4dhydro.eu/outputs). This uniformity allows for seamless comparisons across simulations in our benchmark. The benchmark comprehensively validates the dataset’s simulations using observations from discharge gauges, evapotranspiration towers, soil moisture stations, and satellite-based total water storage anomaly measurements. comparison of simulated and observed discharge Work Package 3 Community Open Science Data & Code sharing Tool (Status: In progress): WP3 is developing an Open Science Data and Code sharing Tool offering easy access to the EO and non EO datasets, code and model results. This team is responsible for managing the Open Science Catalogue. Work Package 4 Round Robin Experiment (Status: In progress): Revision date: March 14, 2024 WP4 has the goal of cross-comparing state-of-art, high resolution Earth Observation datasets in the domains of: soil moisture, precipitation, evapotranspiration, and snow depth and extent. The output of the activity feeds into the subsequent EO-model integration project phase by defining strengths and weaknesses of the observational products with respect to the most comprehensive available reference data. Advanced statistical methods are employed to provide uncertainty information and objective skill criteria for the candidate datasets, as well as defining their spatial scale representativeness (figure below). Overview of the multi-scale analysis of the SMAP NSIDC 1km soil moisture product (Lakshmi & Fang, 2023) over the various domains, against the 0.1° resolution ERA5 Land (E5L, Muñoz-Sabater et al., 2021), the 0.0125° mesoscale Hydrologic Model (mHM, Samaniego et al., 2010), and the ISMN point measurements (Dorigo et al., 2021). The coloured points show the temporal correlation against ISMN. Dorigo, W., Himmelbauer, I., Aberer, D., Schremmer, L., Petrakovic, I., Zappa, L., Preimesberger, W., Xaver, A., Annor, F., Ardö, J., Baldocchi, D., Bitelli, M., Blöschl, G., Bogena, H., Brocca, L., Calvet, J.-C., Camarero, J. J., Capello, G., Choi, M., Cosh, M. C., van de Giesen, N., Hajdu, I., Ikonen, J., Jensen, K. H., Kanniah, K. D., de Kat, I., Kirchengast, G., Kumar Rai, P., Kyrouac, J., Larson, K., Liu, S., Loew, A., Moghaddam, M., Martínez Fernández, J., Mattar Bader, C., Morbidelli, R., Musial, J. P., Osenga, E., Palecki, M. A., Pellarin, T., Petropoulos, G. P., Pfeil, I., Powers, J., Robock, A., Rüdiger, C., Rummel, U., Strobel, M., Su, Z., Sullivan, R., Tagesson, T., Varlagin, A., Vreugdenhil, M., Walker, J., Wen, J., Wenger, F., Wigneron, J. P., Woods, M., Yang, K., Zeng, Y., Zhang, X., Zreda, M., Dietrich, S., Gruber, A., van Oevelen, P., Wagner, W., Scipal, K., Drusch, M., and Sabia, R.: The International Soil Moisture Network: serving Earth system science for over a decade, Hydrol. Earth Syst. Sci., 25, 5749–5804, https://doi.org/10.5194/hess-25-5749-2021, 2021. Muñoz-Sabater, J., Dutra, E., Agustí-Panareda, A., Albergel, C., Arduini, G., Balsamo, G., Boussetta, S., Choulga, M., Harrigan, S., Hersbach, H., Martens, B., Miralles, D. G., Piles, M., Rodríguez-Fernández, N. J., Zsoter, E., Buontempo, C., and Thépaut, J.-N.: ERA5-Land: a state-of-the-art global reanalysis dataset for land applications, Earth Syst. Sci. Data, 13, 4349–4383, https://doi.org/10.5194/essd-13-4349-2021, 2021. Lakshmi, V. and B. Fang. 2023. SMAP-Derived 1-km Downscaled Surface Soil Moisture Product, Version 1. [Indicate subset used]. Boulder, Colorado USA. NASA National Snow and Ice Data Center Distributed Active Archive Center. https://doi.org/10.5067/U8QZ2AXE5V7B. Accessed: 09-09-2023. Samaniego, L., Kumar, R. & Attinger, S. Multiscale parameter regionalization of a grid-based hydrologic model at the mesoscale. Water Resour. Res. 46, https://doi.org/10.1029/2008WR007327 (2010). Revision date: September 28, 2024 Currently working on Deliverable M4.2, which is the community round-robin paper. Work Package 5 Benchmarking and Data-assimilation experiment (Status: In progress): Revision date: March 14, 2024 4DHydro working package 5 builds on earlier simulations analysed in WP2, and it further aims at adjusting the source code of the LSMs and HMs to be able to run multiple high-resolution simulations. Compared with earlier WP2 simulations, we will employ unified meteorological forcing data sets here. The hydrological simulations will be performed at different spatial resolutions (i.e. 1km and 5km, as shown here) and evaluated over multivariate characteristics with hierarchically increasing complexity. Different spatial scales and EO scenarios with and without in-situ observations will be tested across three domains of interest and ultimately evaluated in the European domain at 1km. The discharge simulation using mHM model at high spatial resolution (0.015625 degree) The discharge simulation using mHM model at low spatial resolution (0.125 degree). Summary of the Current Status of WP5: Revision date: September 28, 2024 The fifth work package (WP5) of the 4DHydro project focuses on conducting benchmarking exercises to evaluate model performance before and after integrating high-resolution Earth Observation (EO) data. The ultimate goal is to generate improved terrestrial Essential Climate
The applied models in the project
Models Land-surface and hydrological models (LSM/HMs) The reference dataset comprises eight LSM/HM models: Community Land Model (CLM), GeoFrame, mesoscale Hydrologic Model (mHM), Parflow-CLM, PCRaster Global Balance (PCR-GLOBWB), TETIS, Terrestrial Systems Modeling Platform (TSMP), and wflow_sbm. These encompass four hydrological models, two land-surface models, and one hybrid hydrological and soil-vegetation atmosphere transfer (SVAT) model. Table 1 outlines the datasets employed for model parameterization. Community Land Model (CLM) CLM, a key component of the Community Climate System Model (CCSM3), plays a crucial role in global climate studies. It covers various processes like biophysics, radiation interactions, heat transfer, hydrology, and vegetation characteristics. The version used in this study, CLM 3.5, introduces significant improvements in hydrological cycle simulation. Changes include updated surface datasets, enhanced canopy integration, scaled canopy interception, a simplified runoff model, a groundwater model, and a new frozen soil scheme. Modifications also address soil water availability, a resistance term for soil evaporation control, and nitrogen limitations on plant productivity. Notably, the CLM simulations in the reference dataset require no calibration; instead, they utilize a spin-up approach to achieve dynamic equilibrium by considering initial conditions and states. GeoFrame GeoFrame is a flexible computer-based hydrology system, offering a range of modeling solutions built on the Object Modeling system framework. With numerous components, it covers various aspects like rainfall-runoff, snow dynamics, evaporation, transpiration, infiltration, terrain analysis, interpolation, and calibration. GeoFrame supports diverse modeling paradigms, including process-based, lumped, and machine learning approaches. Notably, it accommodates spatially disjoint catchments, enabling modeling at different scales, from point to large catchments like the Blue Nile. mesoscale Hydrologic Model (mHM) mHM is a gridded distributed hydrological model developed by the Helmholtz Centre for Environmental Research GmbH (UFZ). It encompasses various processes including canopy interception, snow dynamics (accumulation and melt), soil moisture dynamics, infiltration, surface runoff, evapotranspiration, deep percolation, subsurface storage, baseflow, discharge generation, discharge attenuation, and flood routing. The model’s source code is highly modular and written in Fortran. mHM has been extensively applied in over 1,000 European basins and globally in more than 5,000 GRDC basins, spanning a range of sizes and spatial resolutions from 1 km by 1 km to 100 km by 100 km. Parflow-CLM ParFlow-CLM is an advanced, massively parallel hydrologic model specifically tailored for supercomputing environments, serving as a benchmark for supercomputing centers. It simulates variably saturated groundwater flow and overland flow while integrating land-surface processes such as evaporation and transpiration through the Common Land Model (CLM). The model’s application spans from test sites to continental scales, operating on sub-daily to climate time scales, and is utilized for scientific research as well as quasi-operational purposes globally. Moreover, ParFlow is a vital component of the Terrestrial Systems Modeling Platform (TSMP), which comprehensively addresses the terrestrial water and energy cycle from bedrock to the atmosphere. PCRaster Global Water Balance (PCR-GLOBWB) PCR-GLOBWB is a global hydrology and water resources model based on a grid system, developed at the Department of Physical Geography, Faculty of Geosciences, Utrecht University, the Netherlands. This model comprehensively represents the terrestrial component of the hydrological cycle. For each grid cell and daily time step, PCR-GLOBWB simulates moisture storage and water exchange between the soil, atmosphere, and underlying groundwater reservoir. The model fully integrates human water use, estimating demands for irrigation, livestock, industry, and households. These demands are then translated into actual withdrawals from groundwater and surface water sources, such as rivers, lakes, and reservoirs, considering water availability and maximum groundwater pumping capacity. TETIS TETIS is an eco-hydrological model with spatial distribution, developed by the Instituto de Ingeniería del Agua y Medio Ambiente (IIAMA) of Universitat Politècnica de València (UPV) since 1995. This model is versatile, accommodating a wide range of spatial scales from under 1 km² to 60,000 km², various spatial resolutions, and diverse climatic conditions worldwide. TETIS considers spatial heterogeneity in inputs, parameters, and state variables, offering sub-modules for reservoir operation, snow accumulation and melting, sediment erosion, transport and deposition, nitrogen cycle, natural dynamic vegetation, flood and drip irrigation, and crop production. The model incorporates satellite data, such as NDVI and surface soil moisture, in a multi-objective calibration process. Terrestrial Systems Modeling Platform (TSMP) TSMPis a fully integrated terrestrial model that balances water and energy from groundwater through the land surface to the atmosphere. It incorporates Parflow for variably saturated groundwater and surface water flow, CLM for land surface processes, and COSMO, the former weather prediction system of the German Weather Service, for atmospheric processes. wflow_sbm Wflow_sbm is a distributed hydrological model developed by Deltares, written in Julia. Initially based on the topog_sbm concept, it aims to balance between low-resolution, low-complexity (conceptual) and high-resolution, high-complexity (physics-based) hydrological models. Achieving this balance involves parameters grounded in physical characteristics or processes, maintaining relatively fast run times. The model encompasses various hydrological processes including glacier and snow dynamics, lakes and reservoirs (including operations), evapotranspiration, unsaturated zone dynamics, lateral subsurface flow, and multiple surface flow routing modules.